Rick Shaw Rick Shaw's Profile Page

Rick Shaw Rick Shaw

0 Course Enrolled • 0 Course Completed

Biography

100% Pass Quiz 2025 HP HPE6-A85: Aruba Campus Access Associate Exam Unparalleled Interactive EBook

P.S. Free 2025 HP HPE6-A85 dumps are available on Google Drive shared by PremiumVCEDump: https://drive.google.com/open?id=1ax-Eq39ErtikQBI7okZYCDE9A_rNto9y

Before purchasing HPE6-A85 prep torrent, you can log in to our website for free download. During your installation, HPE6-A85 exam torrent hired dedicated experts to provide you with free online guidance. During your studies, HPE6-A85 exam torrent also provides you with free online services for 24 hours, regardless of where and when you are, as long as an email, we will solve all the problems for you. At the same time, if you fail to pass the exam after you have purchased HPE6-A85 prep torrent, you just need to submit your transcript to our customer service staff and you will receive a full refund.

HP HPE6-A85 (Aruba Campus Access Associate) Exam is designed to test a candidate’s knowledge and skills in deploying Aruba wireless networks in small to medium-sized businesses and enterprise environments. HPE6-A85 Exam is intended for network administrators, network engineers, and other IT professionals who are responsible for managing and deploying Aruba wireless networks.

>> HPE6-A85 Interactive EBook <<

100% HPE6-A85 Exam Coverage & HPE6-A85 Exam Registration

PremiumVCEDump offers the best self-assessment software for the HPE6-A85 exam. This desktop-based practice exam provides valid and up-to-date HPE6-A85 practice test questions. You can customize the software by adjusting the time and number of Aruba Campus Access Associate Exam (HPE6-A85) questions to your preferences. Additionally, you can try a free demo of the HPE6-A85 Practice Test. This software keeps track of all your HPE6-A85 practice exam attempts, allowing you to monitor your progress and improve your Aruba Campus Access Associate Exam (HPE6-A85) exam preparation.

HP HPE6-A85 Exam is a 90-minute exam that consists of 60 multiple-choice questions. HPE6-A85 exam covers a wide range of topics related to Aruba wireless networking, including RF fundamentals, WLAN design and deployment, ArubaOS features and functionality, network security, troubleshooting, and more. To pass the exam, candidates must score at least a 70%.

HP Aruba Campus Access Associate Exam Sample Questions (Q53-Q58):

NEW QUESTION # 53
Which statement about manual switch provisioning with Aruba Central is correct?

A. Manual provisioning does not require DHCP and does not require DNS
B. Manual provisioning requires DHCP and does not require DNS
C. Manual provisioning requires DHCP and requires DNS
D. Manual provisioning does not require DHCP and requires DNS

Answer: B

Explanation:
Manual switch provisioning in Aruba Central can be done without relying on DNS services, but it does require DHCP to assign IP addresses to the switches. DHCP is essential for the switches to obtain an IP address, which is necessary for them to communicate within the network and with Aruba Central for management and configuration purposes. DNS, on the other hand, is not strictly required for manual provisioning as direct IP addresses or other methods can be used to connect to Aruba Central or other management interfaces.

NEW QUESTION # 54
You are working with a pair of 6300M switches in a VSF stack. The switch has 48 SmartRate 5G ports, 2 SFP28 ports, and 2 SFP56 ports. Both SFP56 ports are used for stacking.
You need to provide an LACP connection to another identical stack with the maximum available bandwidth possible. What should you configure?

A. a 16-member LAG using 2 SFP28 ports and 6 SR5 ports on each switch
B. an eight-member LAG using 4 SR5 ports on each switch
C. an eight-member LAG using 2 SFP28 ports and 2 SR5 ports on each switch
D. a four-member LAG using 2 SFP28 ports on each switch

Answer: A

Explanation:
To provide an LACP connection with the maximum available bandwidth, one should configure a link aggregation group (LAG) using all available ports that can be used for data transfer. Since the SFP56 ports are used for stacking, the next best option is to use the 2 SFP28 ports and as many SmartRate 5G (SR5) ports as possible on each switch, which would allow for a 16-member LAG, with 2 SFP28 and 6 SR5 ports on each switch contributing to the LAG.

NEW QUESTION # 55
Which commands are used to set a default route to 10.4.5.1 on an Aruba CX switch when ln-band management using an SVl is being used?

A. default-gateway 10.4.5.1
B. ip route 0.0 0 0/0 10.4.5.1
C. iP default-gateway 10.4.5.1
D. ip route 0 0 0.070 10.4 5.1 vrf mgmt

Answer: B

Explanation:
Explanation
The command that is used to set a default route to 10.4.5.1 on an Aruba CX switch when in-band management using an SVI is being used is ip route 0.0 0 0/0 10.4.5.1 . This command specifies the destination network address (0.0 0 0) and prefix length (/0) and the next-hop address (10.4.5.1) for reaching any network that is not directly connected to the switch. The default route applies to the default VRF Virtual Routing and Forwarding.
VRF is a technology that allows multiple instances of a routing table to co-exist within the same router at the same time. VRFs are typically used to segment network traffic for security, privacy, or administrative purposes. , which is used for in-band management traffic that goes through an SVI Switch Virtual Interface.
SVI is a virtual interface on a switch that allows the switch to route packets between different VLANs on the same switch or different switches that are connected by a trunk link. An SVI is associated with a VLAN and has an IP address and subnet mask assigned to it
https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-6200/Content/Ch
2
https://www.arubanetworks.com/techdocs/AOS-CX/10_08/HTML/ip_route_4100i-6000-6100-6200/Content/Ch

NEW QUESTION # 56
A network technician has successfully connected to the employee SSID via 802 1X Which RADIUS message should you look for to ensure a successful connection?

A. Authorized
B. Success
C. Access-Accept
D. Authenticated

Answer: C

Explanation:
The RADIUS message that you should look for to ensure a successful connection via 802.1X is Access- Accept. This message indicates that the RADIUS server has authenticated and authorized the supplicant (the device that wants to access the network) and has granted it access to the network resources. The Access- Accept message may also contain additional attributes such as VLAN ID, session timeout, or filter ID that specify how the authenticator (the device that controls access to the network, such as a switch) should treat the supplicant's traffic.
The other options are not RADIUS messages because:
* Authorized: This is not a RADIUS message, but a state that indicates that a port on an authenticator is allowed to pass traffic from a supplicant after successful authentication and authorization.
* Success: This is not a RADIUS message, but a status that indicates that an EAP Extensible Authentication Protocol (EAP) is an authentication framework that provides support for multiple authentication methods, such as passwords, certificates, tokens, or biometrics. EAP is used in wireless networks and point-to-point connections to provide secure authentication between a supplicant (a device that wants to access the network) and an authentication server (a device that verifies the credentials of the supplicant). exchange has completed successfully between a supplicant and an authentication server.
* Authenticated: This is not a RADIUS message, but a state that indicates that a port on an authenticator has received an EAP-Success message from an authentication server after successful authentication of a supplicant.
References: https://en.wikipedia.org/wiki/RADIUS#Access-Accept https://www.cisco.com/c/en/us/support
/docs/security-vpn/remote-authentication-dial-user-service-radius/13838-10.html https://en.wikipedia.org/wiki
/IEEE_802.1X#Port-based_network_access_control https://en.wikipedia.org/wiki
/Extensible_Authentication_Protocol#EAP_exchange

NEW QUESTION # 57
When performing live firmware upgrades on Aruba APs. which technology partitions all the APs based on RF neighborhood data minimizing the impact on clients?

A. Aruba AirMatch
B. Aruba ESP
C. Aruba Ai insights
D. Aruba ClientMatch

Answer: A

Explanation:
Aruba AirMatch is a feature that optimizes RF Radio Frequency. RF is any frequency within the electromagnetic spectrum associated with radio wave propagation. When an RF current is supplied to an antenna, an electromagnetic field is created that then is able to propagate through space. performance and user experience by using machine learning algorithms and historical data to dynamically adjust AP power levels, channel assignments, and channel width. AirMatch performs live firmware upgrades on Aruba APs by partitioning all the APs based on RF neighborhood data and minimizing the impact on clients. AirMatch uses a rolling upgrade process that upgrades one partition at a time while ensuring that adjacent partitions are not upgraded simultaneously. References: https://www.arubanetworks.com/assets/ds/DS_AirMatch.
pdfhttps://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/arm
/AirMatch.htm

NEW QUESTION # 58
......

100% HPE6-A85 Exam Coverage: https://www.premiumvcedump.com/HP/valid-HPE6-A85-premium-vce-exam-dumps.html

What's more, part of that PremiumVCEDump HPE6-A85 dumps now are free: https://drive.google.com/open?id=1ax-Eq39ErtikQBI7okZYCDE9A_rNto9y